Montelierre
Etna Straight Joint 1X1 Stepwise Matte
At 24X24, Etna's deep taupe-gray base and copper veining take on a square proportion, one of the more adaptable sizes in the Montelierre lineup. StepWise� technology keeps the matte surface slip resistant, and the large-format square works well in either a grid layout or a straightforward stacked pattern.
Countertop
Floor
Wall
Exterior Floor
Shower Floor
Still Deciding?
Special Features
StepWise
For a full list of colors, visit https://www.flixorvunmax.pro/products/stone-look/montelierre/etna-straight-joint-1x1-stepwise-matte
Overview
The square format changes Etna's rhythm compared to the plank size, since the copper veining repeats in both directions rather than running the length of a single tile. The contrast stays just as sharp, distributed a little more evenly across the floor.
Design Note
This size suits an entryway or a kitchen built to make a statement rather than fade into the background. Aged brass fixtures and dark walnut millwork pull warmth from the copper veining. Because the square format transitions cleanly between spaces, Etna here works well carrying its drama from an interior room toward a covered patio or entry.
-
Product Details
Collection Name Montelierre Color Code MT57 Color Name Etna Color Family Gray Nominal Size 1X1 Actual Size 9.843 X 9.843 Nominal Thickness 1/4 Nominal Mounted Sheet Size 10x10 Mount Method Dot Mount Size Category Small Country of Origin Mexico Finish Matte Body Type Glazed Mosaics Edge Non Rectified Mosaic Pattern Straight Joint Shade Variation V2 MEDIUM VARIATION Pre-Consumer Recycled 40.6 Post-Consumer Recycled 1.3
-
Application
Countertop
Floor
Wall
Exterior Floor
Shower FloorTarget Dcof Wet Suitable Dry & Level - Interior Floor N/A ✔ Wet & Level - Interior Floor ≥0.42 ✔ Shower Floors (Residential or Light Commercial) ≥0.42 ✔ Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) ≥0.60 ✔ Ramps & Inclines ≥0.65 Walls/Backsplashes N/A ✔ Countertops N/A ✔ Pool Linings N/A ✔ 1/8" ● Manufacturer Advisory: All tile is measured by the DCOF AcuTestTM method. Tiles with DCOF values less than 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.
● Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed.
-
Specifications
Performance Chart Test Method Result Water Absorption ASTM C373 < 3.0 Breaking Strength ASTM C648 > or equal to 250 lbf Scratch Hardness ASTM MOHS 4.0-8.0 Chemical Resistance ASTM C650 Resistant
-
Download Tear Sheet
Etna Straight Joint 1X1 Stepwise Matte
View PDF
-
Special Features
Special Features
StepWise